Controller accesories
Controller accesories
Subcategories
-
-
SKAARHOJ ETH-SDI Link
429,00 € In StockMerge Multiple RCP IP Control Signals Onto a Single SDI Wire Receives “UDP Camera Control” information over Ethernet and forwards it on the SDI out connector. Used to merge network data from multiple RCPs onto a single SDI wire.
-
SKAARHOJ ETH-LANC Link
349,00 € In StockETH-LANC Link - shade your LANC compatible cameras Control your Sony cameras such as FS5, FS7 and other LANC compatible cameras (any camera the Sony RM-BP30 supports). Or use the ETH-LANC Link to control Canon cameras that speaks the RC-V100 Protocol such as the C Series, XF Series and ME Series.
-
SKAARHOJ SDI-GPI Link
869,00 € In StockThe SKAARHOJ SDI-GPI Link box will accept 16 digital inputs from your video infrastructure and convert them into Blackmagic Camera Control Tally signals. This will for instance enable any video switcher with tally contact closure outputs to send essential tally information to your supported Blackmagic cameras such as URSA Mini (+Pro) or Studio Camera series.
-
SKAARHOJ ATEM-TCP Link
429,00 € In StockTCP control ATEM Switchers for Crestron, Extron and other AV systems SKAARHOJ ATEM-TCP Link gives you TCP access to almost any ATEM switcher feature. Indispensable for systems integrators.
-
SKAARHOJ ETH-TALLY Link
599,00 € In StockTally Box System Tally Box System The SKAARHOJ Tally System is a great add-on for your live video-production. The tally light have two LEDs - one facing the camera operator and the big one facing the presenter. The operator LED have both program and preview tally while the presenter LED is just for program.
-
SKAARHOJ Tally Lamp
219,00 € In StockTally Box System The SKAARHOJ Tally System is a great add-on for your live video-production. The tally light have two LEDs - one facing the camera operator and the big one facing the presenter. The operator LED have both program and preview tally while the presenter LED is just for program.
-
SKAARHOJ ETH-GPI Link
479,00 € In StockGPIO Control Made Easy Setting up an I/O device have never been this flexible. Connect and control anything from your tally lamps, trigger ATEM switcher routines, control a HyperDeck, change Scopes on a SmartScope Duo and route inputs/outputs on a VideoHub. Connect and control up to 8 devices at the same time!
-
SKAARHOJ ETH-GPI Link (Dual GPIO)
729,00 € In StockGPIO Control Made Easy Setting up an I/O device have never been this flexible. Connect and control anything from your tally lamps, trigger ATEM switcher routines, control a HyperDeck, change Scopes on a SmartScope Duo and route inputs/outputs on a VideoHub. Connect and control up to 8 devices at the same time!
COLOUR CORRECTION
