More info
Specifications in detail
Camera
-
Image Sensor
Type 1.0 (1.0 in.) single-plate CMOS sensor -
Effective Pixels
approx. 8.29 megapixels (3840 x 2160) -
Lens
f=8.3 – 124.5 mm, F/2.8 – 4.5, 15x optical zoom, 9-bladed iris diaphragm -
Optical Zoom
15x optical zoom -
Digital Zoom
20x digital zoom -
Focal Length
f=8.3 – 124.5 mm, F/2.8 – 4.5,Â
35mm equivalent focal length: approx. 25.5 (W) – 382.5 mm (T) -
Angle of View
Horizontal: 73.0 (W) – 5.7° (T)Â
Vertical: 45.2° (W) – 3.2° (T) -
Minimum Subject Illumination
3840 x 2160: Approx. 1.5 lux (shutter speed 1/30 sec., Frame Rate 29.97P, Gain 33.0 dB)Â
1920 x 1080: Approx. 3 lux (shutter speed 1/60 sec., Frame Rate 59.94P, Gain 33.0 dB) -
Shutter Speed
1/3 – 1/2000 sec. (specific values depend on the frame frequency and frame rate) -
Iris
Manual/Automatic aperture -
Gain
-6.0 db ~ 33.0 db -
ND Filter
Built-in (Off, 1/4, 1/16, 1/64), motor operated -
White Balance
AUTO (AWB), Set A, Set B, preset settings (daylight: 5,600 K*, tungsten lamp: 3,200 K*),Â
color temperature setting (2,000 K – 15,000 K), ManualÂ
* Color temperatures are given for reference purposes only. -
Focus
Focus mode: Manual, AF-boosted MF, Continuous AF, Face AF, TrackingÂ
AF type: Dual Pixel CMOS AF, Contrast AF -
Gamm
Normal1 (Standard), Normal2 (x4.0), Normal3 (BT.709), Normal4 (x5.0), Wide DR, Canon Log 3 -
Pan and Tilt
Pan operation range: Horizontal ±170°Â
Pan operation speed: 0.1° – 100°/sec.Â
Tilt operation range: Vertical -30° – +90°Â
Tilt operation speed: 0.1° – 100°/sec.
Pan-Tilt
-
Protocol
Protocol: XC (Canon's original), RTSP/RTP, NDI|HX, RTMP/RTMPS, Standard Communication (Serial), Standard Communication (IP)
Server
-
Video Output Format: SDI
1920 x 1080: 59.94P/59.94i, 50.00P/50.00i/25.00P, 29.97P/23.98P (4:2:2 10 bit)Â
1280 x 720: 59.94P, 50.00P (4:2:2 10 bit)Â
– Same video format required for SDI and HDMI (cannot select different formats forÂ
SDI and HDMI)Â
– When 3840 x 2160 is selected for HDMI, video will not be outputted to SDI. -
Video Output Format: HDMI
3840 x 2160: 29.97P, 25.00P, 23.98P (4:2:2 10 bit)Â
1920 x 1080: 59.94P/59.94i, 50.00P/50.00i/25.00P, 29.97P/23.98P (4:2:2 10 bit)Â
1280 x 720: 59.94P, 50.00P (4:2:2 10 bit)Â
– Same video format required for SDI and HDMI (cannot select different formats forÂ
SDI and HDMI)Â
– When 3840 x 2160 is selected for HDMI, video will not be outputted to SDI. -
Video Output Format: IP
3840 x 2160: 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit)Â
1920 x 1080: 59.94 fps, 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit)Â
1280 x 720: 59.94 fps, 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit)Â
640 x 360: 59.94 fps, 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit)Â
– If 59.94/50.00 Hz is selected for the frame frequency, the 3840 x 2160 format cannot be selected.Â
– A frame rate that exceeds the frame frequency cannot be selected.Â
– JPEG has one pattern fixed depending on the frame frequency (format is fixed and cannot be selected)Â
Resolution: 1280 x 720Â
When frame frequency is 59.94/50.00 Hz: 14.99 fps, when frame frequency is 23.98 Hz: 11.99 fps, when frame frequency is 29.97/25.00 Hz: 12.50 fps -
Video Output Format: USB
- -
Preset
Number of presets: Max. 100 (including home position)
Interface
-
Communication Control
LAN, Wi-Fi, Serial, IR -
Network Terminal
LAN x 1, RJ45, 1000Base-T -
3G-SDI OUT Terminal
BNC jack (output only) x 1, 0.8 Vp-p/75 Ω, unbalancedÂ
SMPTE 424, SMPTE 425, SMPTE ST 299-2 compliantÂ
Embedded audio, Time code (VITC/LTC) -
GEN-LOCK Terminal
BNC jack x 1, 1.0 Vp-p/75 Ω, input only -
HDMI OUT Terminal
HDMI connector x 1, output only -
RS-422 Terminal
RJ45 connector x 1 -
INPUT 1/INPUT 2 Terminals
XLR/Audio Input (3-pin jack) (pin1: shield, pin2: hot, pin3: cold), 2 sets, balancedÂ
Sensitivity (MIC): -60 dBu (Manual volume center, full scale -18 dB)/600 Ω/Att.: 20 dBÂ
Sensitivity (LINE): +4 dBu (Manual volume center, full scale -18 dB)/1 kΩ or moreÂ
Supply Voltage: 48 V DC (Bias resistance: 6.8 kΩ) -
MIC Terminal
Ï•3.5 mm stereo mini jack (unbalanced, plug-in power supported)Â
Sensitivity (MIC): -72 dBV (Manual volume center, full scale -18 dB)/1 kΩ or more/Att.: 20 dBÂ
Sensitivity (LINE): -10 dBV (Manual volume center, full scale -18 dB)/1 kΩ or moreÂ
Supply Voltage: 2.4 V DC (Bias resistance: 2.2 kΩ) -
USB Terminal
Type-A (USB 2.0) x 1 (future expansion)
Physical Features
-
Operating Environment
TemperatureÂ
0°C – +40°C (+32°F – +104°F)Â
HumidityÂ
10% – 90% (without condensation) -
Power Supply
PoE: PoE+ power supply via LAN connector (IEEE802.3at compliant)Â
– PoE cannot be usedÂ
External power source: 24 V DC (using included AC adaptor) -
Power Consumption
PoE+ Input: Approx. 19.6 W* max. (body only)Â
DC Input: Approx. 18.6 W max. (body only)Â
* Class 4 (25.5 W required) for power supply devices -
Dimensions (W x D x H)
Approx. 200 x 269 x 208 mm (7.87 x 10.59 x 8.19 in.) (excluding protrusions) -
Weight
Approx. 4.1 kg (9.04 lb.) (body only) -
IP Rating
-